T Slot Rail Uk
Description
*Designed to work with VW Caddy Maxi Rear Cargo Hoop Mounting Holes.
Use this versatile framing to configure machine guards, enclosures, carts, and workstations. These rails have continuous T-slots for attaching fittings. Rail profiles with slots on all sides offer the most design flexibility, while profiles with closed sides give a finished appearance. Rails are made of aluminum. Low-profile rails are often used to attach handles, sensors, and other accessories. 80/20 provides T-slot aluminum profiles, or bars, that have channels used to connect other bars and parts — for instance, panels, linear bearings or casters. It is a building system anyone can use to create custom solutions. 80/20 UNIVERSITY One of the many benefits you'll find with 80/20 profiles and parts is.
T Slot Rail
Its a simple idea….. The vehicle has factory mounting points so why not use them to mount your multiple steads !! One single slot rail 990mm long with 2 x M6 fixings each end.
We supply a piece of 40mm wide x 16mm high x 990mm long extrusion that has a single t-nut slot and 2 x end caps. There are 2 x recessed slots machined at each end to allow for 2 x M6 fixings to be added to the vehicles factory fitted fixing holes, we also supply 2 x spacers to fit between the existing cargo hoop fixing holes and the underside of the rail so you don’t crush the rear threshold.
To fit remove 2 screws from each cargo hoop left and right, place supplied spacers on top of the cargo hoop, inline with the tapped hole, place the rail over the top and drop the supplied M6 fixings through and tighten, that’s it ready to add fork mounts.
Fitting 1 – 2 bikes Once fitted to your vehicle the t-nuts (supplied with the Extrusion fitting Fork Mounts) just slip in from above so you don’t need to worry about bashing the end caps off. Your Fork Mount/ Mounts can then be dropped on, finger knobs located in the t-nuts and positioned straight, then tighten.
Fitting 3 – 4 bikes Your going to need one of our off-set plates added to each of you fork mounts (these can also be added for 1-2 bikes 😉 These do exactly what it says on the tin, it allows your bikes to be off-set so you can nest them nice and close, There is no right or wrong way to fit them because it all depends on what size your ride is !
*Don’t worry if you have already purchased one of our surface mount Fork Mounts we’ve got you covered, just buy the separate fixing kit when adding the rail to your basket 😉
T Slot Rail System
What you get:
- 1 x 40mm wide x 16mm High x 990mm Long Single T-Slot Extrusion Rail with slots each end
- 2 x End Caps
- 4 x Clamping Spacer
- 4 x M6 Stainless Cap Screws
Aluminium Extrusions System created for engineers by engineers.
Valuframe is the t-slotted aluminium profile system designed for economical frame building. It's purpose is to replace welded steel fabrications and the more established, more expensive aluminium extrusion systems and aluminium profile systems available in the UK.
Our range of t-slot aluminium extrusions is called Valuframe to emphasise the focus on value for money. It's designed to be an aluminium extrusion system that's a prudent choice for cost conscious engineers and machine builders. Since introduction to the UK aluminium profile systems market Valuframe has successfully helped engineers all over the UK and Europe design and build economical aluminium frameworks. We retain our valued customers because we work harder to keep costs down and our service and availability levels high.
The aluminium profiles and connecting elements in the Valuframe system will seamlessly combine with many of the the more established and expensive aluminium extrusion based machine building systems available. Our aluminium profile system has the same manufacturing tolerances, the same quality finish and the same options in connections and fittings as many of thesemore expensive aluminium extrusion framework systems. There are no minimum quantities to buy with Valuframe. We will not make you buy 100 slot nuts when you need only 4. The unit of sale for the vast majority of our parts is 1. Changing to Valuframe is easy, talk to us about compatibility if you need to change from another aluminium extrusion system to Valuframe, we will give you a straight answer.
Key features of the Valuframe t-slot aluminium profile system.
Low cost standard connector | No-Drill connector for fast connection - no machining | Universal connector for versatile strength | Angle connection for strength and simplicity | Corner block connection is aesthetically pleasing |
All profile holes can be directly tapped | Wire mesh in the profile slot for guarding panels | Panel material held in with plastic blocks | Panel material held in slot with plastic filler strip | Slot fillers and flat faced profiles for clean areas |
Our aluminium extrusion series.
Series 5 profiles Are generally based on 20mm core dimensions, with a 5mm slot that allows a maximum slot nut thread of M5, these aluminium extrusions are used for small, light applications such as sensor supports, small doors, frames and enclosures. | Series 6 profiles Are generally based on 30mm core dimensions, with a 6mm slot that allows a maximum slot nut thread of M6, these profiles are used for larger applications such as furniture, table top frames and enclosures. | Series 8X30 profiles Series 8X30 profiles are versatile profiles offering the economy of 30mm dimensions with the flexibility of an 8mm slot for a wide range of connecting elements. Used for a wide range of applications from frame building to jigs and fixtures. | Series 8 profiles Are the most popular, based on 40mm core dimensions, with an 8mm slot that allows a maximum slot nut thread of M8, these profiles are used for a vast range of applications from machine frame building to guarding, from special enclosures to vehicle structures. |
What can I make with an aluminium extrusion system?
Valuframe aluminium profile systems and t-slot aluminium extrusions have a huge array of uses, not all industrial. In fact it's versatility is limited only by your imagination, but if you need a little help, then visit our photo gallery for inspiration. |
Why would I use an aluminium profile system?
As a raw material, aluminium extrusions are still more expensive than steel, so why do so many people move over to using aluminium profiles?
No welded joints; so you can move the aluminium extrusions if needed.
No painting or priming; the aluminium is finished with a clean, attractive and modern looking bright anodised finish.
Assembly is an unskilled job; with none of the health and safety issues associated with welding, dressing, painting and other engineering operations.
Speed of assembly; panels and frames can be put together in next to no time.
Adaptability; those slot nuts and many other connecting elements are small but versatile and will help make your frame building life easier.
T Slot Rails For Jigs
Recyclable; you can always use the profiles somewhere else if your assembly is temporary.